Hot Work Permit

Non-Electrical Hot Work Permit

Before initiating hot work, can this job be avoided? Is there a safer way?

This Non-Electrical Hot Work/Open Flame Permit is required for any temporary or non-routine operation involving open flame or spark-producing work consistent with Article 49 of the California Fire code. This includes, but is not limited to: Brazing, Cutting, Grinding, Soldering, Chop Saws, Thawing Pipe, Torch Applied Roofing Hot Guns, Space Heaters, Heat or Hot Air Guns, Hot Boxes and all Welding.

Instructions:

  1. Verify precautions listed below or do not proceed with work.

  2. Complete this permit and issue to person(s) performing the work.

  3. Retain this copy in the project file.

Date: Job Number:
Location of Work:
Purpose of Work:
Name of person(s) doing the work:
Name of fire watch person:

I verify the above location has been examined, the precautions checked on the Precautions Checklist have been taken to prevent fire, and permission is authorized for this work.

Supervisor's Name: Signature:
Duration(Hrs): Start Time: Stop Time:

Hot Work Permits may not be authorized for more than one shift!
N/A Item

Yes No N/A Item
□ □ □ Are water hoses or fire extinguishers available and in good repair?
□ □ □ Is hot work equipment in good repair?
□ □ □ Have flammable liquids, dust, lint and oily deposits within 35 ft. been removed?
□ □ □ Have explosive atmosphere been eliminated?
□ □ □ Has the work surface area been cleaned of grease, paint, etc.
□ □ □ Have combustible floors been wet down, covered with damp sand or covered with fire resistant sheets?
□ □ □ Have surface areas below work area been protected?
□ □ □ Have access ways below work area been barricaded?
□ □ □ Are UV shields in place?
□ □ □ Has enclosed equipment been cleansed of all combustibles?
□ □ □ Have all containers been purged of flammable liquids and vapors?
□ □ □ Will fire watch be provided during and for 60 minutes after work, including lunch breaks?
□ □ □ Has fire watch been provided with suitable fire extinguishing devices?
□ □ □ Has the fire watch person been trained in use of fire extinguishing devices and in sounding alarm(s) or other emergency communications?
□ □ □ Has additional fire watch been assigned to adjoining areas, above and below?
□ □ □ Hot work area will be monitored for 1 hour after completion of work?
□ □ □ Other:

WARNING!

HOT WORK IN PROGRESS

WATCH FOR FIRE!

IN CASE OF AN EMERGENCY

CALL: ______________________________________

AT: ________________________________________


WARNING!