# START-UP SHEET

# Air Compressor

## START-UP SHEET 1601 Las Plumas Ave.
## Air Compressor Ph: (408) 347-3400

**Job Name Job Number**  
**Job Address**

**Section 5: Equipment Description**

| Spec. #: | Submittal #: | P&amp;ID / Dwg #: |
| --- | --- | --- |
| Area Served: |  |  |

| Air Compressor Data | Design | Actual On Site |
| --- | --- | --- |
| Unit Tag # |  |  |
| Manufacturer |  |  |
| Model # |  |  |
| Serial # |  |  |

| Air Dryer Data | Design | Actual On Site |
| --- | --- | --- |
| Unit Tag # |  |  |
| Manufacturer |  |  |
| Model # |  |  |
| Serial # |  |  |

| Belt Description |  |  |  |
| --- | --- | --- | --- |
| Size&amp;Quantity |  |  |  |

## Section 6: Equipment Pre-Installation Inspection

| Step | Inspection Description | Yes | No | N/A | Performed By(Initials &amp; Date) |
| --- | --- | --- | --- | --- | --- |
| 6.2 | Nameplate data matches vendor specifications. | □ | □ | □ |  |

**Comments/**  
**Observations**

**Performed By**

**(Therma)**

**Reviewed By**

| Print Name | Signature | Date |
| --- | --- | --- |
|  |  |  |
|  |  |  |

**(Owner/Representatives)**

---

## START-UP SHEET 1601 Las Plumas Ave.  
## Air Compressor Ph: (408) 347-3400

| Step | Inspection Description | Yes | No | N/A | Performed By(Initials &amp; Date) |
| --- | --- | --- | --- | --- | --- |
| 6.3 | All parts are received. | ☐ | ☐ | ☐ |  |
| 6.4 | No visible signs of damage, leak, or defective parts. | ☐ | ☐ | ☐ |  |
| 6.5 | Verify electrical service for correct voltage, current and thermal overload protection. | ☐ | ☐ | ☐ |  |
| 6.6 | Operational and Maintenance(O&amp;M) manual is available in field. | ☐ | ☐ | ☐ |  |
| 6.7 | Start-up technicians have reviewed factory start-up procedures in O&amp;M manual. | ☐ | ☐ | ☐ |  |

**Section 7: Installation Inspection**

| ID | Inspection Description | Yes | No | N/A | Performed By(Initials &amp; Date) |
| --- | --- | --- | --- | --- | --- |
| 7.2 | Unit is installed level and is covered or out of weather. | $\\Box$ | $\\Box$ | $\\Box$ |  |
| 7.3 | Tag # is attached to the unit. | $\\Box$ | $\\Box$ | $\\Box$ |  |
| 7.4 | Service clearance is adequate for maintenance. | $\\Box$ | $\\Box$ | $\\Box$ |  |
| 7.5 | Compressor pump is lubricated. | $\\Box$ | $\\Box$ | $\\Box$ |  |
| 7.6 | Drive belt tension is correct. | $\\Box$ | $\\Box$ | $\\Box$ |  |
| 7.7 | Pulleys are aligned and tight. | $\\Box$ | $\\Box$ | $\\Box$ |  |
| 7.8 | Air inlet, oil filters,and discharge filters are installed properly. | $\\Box$ | $\\Box$ | $\\Box$ |  |
| 7.9 | Compressor oil level is within manufacturer's specification. | $\\Box$ | $\\Box$ | $\\Box$ |  |
| 7.10 | Guard is secure. | $\\Box$ | $\\Box$ | $\\Box$ |  |

## Observations  
**(Owner/Representatives)**

| Print Name | Signature | Date |
| --- | --- | --- |
|  |  |  |
|  |  |  |

---

## START-UP SHEET 1601 Las Plumas Ave.  
## Air Compressor Ph: (408) 347-3400

| Step | Inspection Description | Yes | No | N/A | Performed By(Initials &amp; Date) |
| --- | --- | --- | --- | --- | --- |
| 7.11 | Auto drains are installed on tank and run to sanitary or condensate separator. | $\\Box$ | $\\Box$ | $\\Box$ |  |
| 7.12 | All wiring connections are tight. | $\\Box$ | $\\Box$ | $\\Box$ |  |
| 7.13 | Drain is piped properly. | $\\Box$ | $\\Box$ | $\\Box$ |  |
| 7.14 | Air dryer is installed. | $\\Box$ | $\\Box$ | $\\Box$ |  |
| 7.15 | Oil separator is installed. | $\\Box$ | $\\Box$ | $\\Box$ |  |
| 7.16 | Oil separator drain is run to condensate management system. | $\\Box$ | $\\Box$ | $\\Box$ |  |
| 7.17 | Condensate management system is installed for oil separation. | $\\Box$ | $\\Box$ | $\\Box$ |  |

**Section 8: Operational Inspection**

| ID | Inspection Description | Yes | No | N/A | Performed By(Initials &amp; Date) |
| --- | --- | --- | --- | --- | --- |
| 8.2 | Unit vibration is acceptable. | $\\Box$ | $\\Box$ | $\\Box$ |  |
| 8.3 | Motor rotation is correct. | $\\Box$ | $\\Box$ | $\\Box$ |  |
| 8.4 | Air dryer is functional. | $\\Box$ | $\\Box$ | $\\Box$ |  |
| 8.5 | Oil separator is functional. | $\\Box$ | $\\Box$ | $\\Box$ |  |
| 8.6 | Record the operating parameters below: |  |  |  |  |

| Comments/ Observations |  |
| --- | --- |
|  |  |

**Performed By**  
**(Therma)**

**(Owner/Representatives)**

**Reviewed By**

| Print Name | Signature | Date |
| --- | --- | --- |
|  |  |  |
|  |  |  |

---

# START-UP SHEET

# Air Compressor

## START-UP SHEET 1601 Las Plumas Ave.
## Air Compressor Ph: (408) 347-3400

**Record Start Up Operating Parameters**

| Data | Design | Actual On Site |  |  |
| --- | --- | --- | --- | --- |
| Unit Voltage |  |  |  |  |
| Current |  |  |  |  |
| Phase |  |  |  |  |
| Motor Rotation(RPM) |  |  |  |  |
| Horsepower(HP) |  |  |  |  |
| Air Dryer Voltage |  |  |  |  |
| Current |  |  |  |  |
| Phase |  |  |  |  |
| ΔT°F |  |  |  |  |

**End of Section**

**Comments/**

**Observations**

| Print Name | Signature | Date |
| --- | --- | --- |
|  |  |  |
|  |  |  |

**(Owner/Representatives)**
