Start up - Supp. Form 2
Record start up operating parameters below:
| Data | Actual | Actual | Actual | Actual | Actual | Actual |
|---|---|---|---|---|---|---|
| COMPONENT | ||||||
| Design Voltage | ||||||
| Actual Voltage | ||||||
| Design Amperage | ||||||
| Actual Amperage | ||||||
| Voltage | ||||||
| Current | ||||||
| Phase | ||||||
| Motor RPM | ||||||
| Horsepower(HP) | ||||||
| Service Factor | ||||||
| Belt Size&Quantity | ||||||
| ΔT Heating(Water/Air) | ||||||
| ΔT Cooling(Water/Air) | ||||||
| Suction Pressure | ||||||
| Discharge Pressure | ||||||
| Oil Pressure | ||||||
| Liquid Pressure | ||||||
| Suction SuperheatTemp. $ ^{\circ} \mathrm{F} (^{\circ} \mathrm{C})$ | ||||||
| Liquid SubcoolingTemp. $ ^{\circ} \mathrm{F} (^{\circ} \mathrm{C})$ | ||||||
| Supply Gas Pressure | ||||||
| Manifold PressureHi/Low |
Note: Insert N/A in those deemed not applicable.
Performed By: Print Name Initials Date