## PROJECT:

| Traverse No. | Location: |  | Altitude: | Sea Level |
| --- | --- | --- | --- | --- |
| Design CFM: | Actual CFM: | Static Pressure: | Temp.: |  |

## RECTANGLE

| Width In. |  |
| --- | --- |
| Height In. |  |
| Area (Sq.Ft.) |  |

Minimum total number of readings required:

Rectangle: 16

$$
<10{	ext{ \\10}}	ext{ \\10}	ext{ \\2}=16,~~	ext{>}12=20
$$

Maximum number required for any duct = 64.

If less than 64 readings are taken on any duct, the

distance between readings shall not be over 6".

$$
6^{n}
$$

## ROUND

| Diameter In. |  |
| --- | --- |
| Area (Sq.Ft.) |  |

|  | X | Y |  |  |  |  |  |  |  |  |  |  |  |
| --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- |
| Position | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 |
| 1 |  |  |  |  |  |  |  |  |  |  |  |  |  |
| 2 |  |  |  |  |  |  |  |  |  |  |  |  |  |
| 3 |  |  |  |  |  |  |  |  |  |  |  |  |  |
| 4 |  |  |  |  |  |  |  |  |  |  |  |  |  |
| 5 |  |  |  |  |  |  |  |  |  |  |  |  |  |
| 6 |  |  |  |  |  |  |  |  |  |  |  |  |  |
| 7 |  |  |  |  |  |  |  |  |  |  |  |  |  |
| 8 |  |  |  |  |  |  |  |  |  |  |  |  |  |
| 9 |  |  |  |  |  |  |  |  |  |  |  |  |  |
| 10 |  |  |  |  |  |  |  |  |  |  |  |  |  |
| Subtotals: |  |  |  |  |  |  |  |  |  |  |  |  |  |

## Remarks:

Note: Measurements were taken with Shortridge digital micromanometer model ADM-860 which corrects for air density and internally calculates average velocity using 4 decimal place precision while displaying only whole numbers. Therefore, the sum of the subtotals may not match the true total reported above.

Test Date:

Filename: PT1.XLS (2-97)

Readings by:

FN 8.007.1 REV2