8 007 1

PROJECT:

Traverse No.	Location:		Altitude:	Sea Level
Design CFM:	Actual CFM:	Static Pressure:	Temp.:

RECTANGLE

Width In.
Height In.
Area (Sq.Ft.)

Minimum total number of readings required:

Rectangle: 16

$$ <10{ ext{ \10}} ext{ \10} ext{ \2}=16,~~ ext{>}12=20 $$

Maximum number required for any duct = 64.

If less than 64 readings are taken on any duct, the

distance between readings shall not be over 6".

$$ 6^{n} $$

ROUND

Diameter In.
Area (Sq.Ft.)

	X	Y
Position	1	2	3	4	5	6	7	8	9	10	11	12	13
1
2
3
4
5
6
7
8
9
10
Subtotals:

Remarks:

Note: Measurements were taken with Shortridge digital micromanometer model ADM-860 which corrects for air density and internally calculates average velocity using 4 decimal place precision while displaying only whole numbers. Therefore, the sum of the subtotals may not match the true total reported above.

Test Date:

Filename: PT1.XLS (2-97)

Readings by:

FN 8.007.1 REV2