8 002 start up operator training outline
| Standard Operating Procedure Start-Up Operator Training Outline | SOP No. 8.002 |
|---|---|
| Effective:03-07-2005 Supersedes:03-07-2005 Revision Date:03-07-2005 Page No.:1 of3 | |
| DCR No.:05011 Revision No.:0 |
1 Purpose
1.1 Provide a standard equipment start-up operator training outline.
2 Scope
2.1 This procedure establishes a training outline for air conditioning (HVAC) start-up equipment.
3 Responsibility
3.1 Therma Service/Start-up technician has responsibility for providing training to customer/client. The training outline is described below.
3.2 Therma Service /Start-up technician shall prepare sufficient copies of training outline form FN 8.002.1 and training log FN 8.002.2 prior to performing the training.
4 Procedures
4.1 Pass out training log FN8.002.2 to allow customer/client to write down their names prior to starting the training class.
4.2 Therma Service/Start-up technician shall describe the following training outline to the customer/client.
4.2.1 General system description & component locations
4.2.2 Pre start-up checks
4.2.3 Safety concerns
4.2.4 Normal start-up sequence
4.2.5 Normal shut-down sequence
4.2.6 Emergency shut down sequence
4.2.7 Normal settings and readings during operation
4.2.8 System operation and recommended maintenance
4.2.8.1 Operating pressure
4.2.8.2 Belts
4.2.8.3 Drives and Couplings
4.2.8.4 Oil (Type)
4.2.8.5 Alarms
4.2.8.6 Leaks
4.2.8.7 Normal noise and vibration
4.2.8.8 Filters
4.2.8.9 Drains
4.2.9 Items to be recorded or logged
4.2.10 Spare parts to inventory
4.2.11 Common alarms and troubleshoot
4.2.12 Refer to system operation and maintenance (O&M) manual for detailed information.
4.2.13 Who to call for service or problem
4.2.14 Questions
4.2.15 Notes
Document Approval
Service Manager
3-7-05
Date
Engineering Manager
Quality Assurance Manager
03-07.
2005
Date