7 008 brazing performance qualification

DCR No.: Revision N

11004 No.:2

Effective: 3-06-12 Supersedes: 7-25-97 Revision Date: 7-12-11 Page No.:1 of 3

1 Purpose

1.1 To establish a standard procedure for the qualification of all Therma brazers.

2 Scope

2.1 This procedure applies to all Therma brazers procedures, as described in SOP 5.013.

3 Responsibility

3.1 The Therma quality control manager (QCM) shall administer this procedure and verify that brazer on the job has satisfied the criteria herein.

3.2 The Therma quality control examiner (QCE) is responsible for ensuring the brazer is performing tasks.

4 Reference

4.1 ASME code section IX, part QB Brazing.

5 Procedures

5.1 QCE shall review the customer's specification for brazer qualifications.

5.2 QCE shall verify that the brazer is capable of following the brazing procedure in SOP 5.013.

5.3 QCM shall verify that the brazer has satisfied the criteria and document finding on form FN 5.013.2 (Performance Qualification Record).

5.4 QCM shall issue a certification to the brazer.

THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF THERMA CORPORATION. ALL INFORMATION SHALL (A) BE RETAINED IN CONFIDENCE; (B) NOT BE REPRODUCED IN WHOLE OR IN PART; AND (C) NOT BE USED OR INCORPORATED IN ANY PRODUCT EXCEPT UNDER EXPRESS WRITTEN AGREEMENT WITH THERMA CORPORATION.

6 Review and Approval

6.1 No approval is necessary.

Document Approval

Process Systems Manager

3-6-12 Date

Field Operation Manager

3-6-12 Date

Engineering Manager

3-6-12 Date

Quality Assurance Manager

3-6-12 Date