7 002 2 specification acceptance criteria
Project: ____
Building: ____
Alloy Type: ____
1601 Las Plumas Ave.
San Jose, CA. 95133
Ph: (408) 347-3400
Specification Acceptance Criteria
ASTM/BPE Spec.: _____
Issue Date: ____
Issue By: ____
| Ovality | Wall Thickness | Surface Finish(Internal Surface only) | ||
|---|---|---|---|---|
| Material Type&Size, Outside Diameter(OD)(Inch) | Permissible Variations in OD(Inch) | Material Type&Size, Outside Diameter(OD)(Inch) | Wall Thickness Tolerance(Inch) | Roughness of Inside Surface(Micro-inchRa) |
COMMENTS: ____