6 024 1 clean steam generator safety start up testing shutdown form

Data	Actual	Actual	Actual	Actual	Actual	Actual
PRE-OPERATION CHECK
Date & Time
Job #
FAT Equip Tag(X-7701)
FAT Equip Specification ID#
P&ID Number
Job Specified Pressure(psig)
Job Specified H2O Quality(MΩ)
Lock-Out/Tag-Out Rev'd Therma
Lock-Out/Tag-Out Rev'd Owner
Operating Manual Rev'd Therma
Operating Manual Rev'd Owner
Visual Inspection for leaks/damage
Clearance from Combustibles
Verify Test vs. Relief Valve Press.
Verify HP Clamps&Gaskets
Verify Steam Flow Path w/P&ID
Verify Steam Duty Hose
Test Water Quality
Close Drain Valve
Make-up Water Pressure(psig)
PRESSURE CONTROLS, OPERATION AND TESTING
Open Make-up Water Supply
Switch power to ON
Verify Water Level Control
Verify Low Water Cutoff Control
Verify Operating Pressure Control
Verify High Limit Pressure Control

OPERATION
Set Operating Pressure Control Setpoint- min 10 psi>MU(psig)
Set High Limit Pressure Control Setpoint- approx=MU(psig)
Open Make-up water supply
Turn main disconnect switch ON
Switch Power ON
Supply Steam Pressure Actual(psig)
System Checked for Leaks
SHUTDOWN&MAINTENANCE
Power Off&Locked Out
Close make-up water valve
Pressure Bled and Unit Drained
Close drain valve
Open make-up water valve
Switch Power ON
Verify water fills&level correct
Switch Power OFF
Press Manual Reset on HLPC
Start-up Technician Init.&Date
Owner or Rep.Init.&Date