Procedure Qualification Records

PROCEDURE QUALIFICATION RECORDS (PQR) QW-483 (Front)

PQR No.	Date:
WPS No.:	Type(s):
Welding Process(es):	(Manual, Automatic,Semi-Auto)
JOINTS(QW-402)
BASE METALS(QW-403)
Material Spec.
Type or Grade
P-No. to P-No.
Thickness of Test Coupon	POSTWELD HEAT TREATMENT(QW-407)
Temperature
Time
Other
GAS(QW-408)
Thickness of Test Coupon
Diameter of Test Coupon
Other




FILLER METALS(QW-404)
SFA Specification
AWS Classification		ELECTRICAL CHARACTERISTICS(QW-409)
Current
Polarity
SF A Specification
AWS Classification
Filler Metal F-No.
Weld Metal Analysis A-No.
Size of Filler Metal
Other

Weld Metal Thickness
POSITION (QW-405)
Position of Groove
TECHNIQUE (WQ-410)
Travel Speed
Position of Groove
Weld Progression (Uphill, Downhill)
Other

PREHEAT(QW-406)
Preheat Temp.
Interpass Temp.
Other

QW-483 (Back)

Tensile Test (QW-150)

PQR No.

Specimen No.	Width	Thickness	Area	Ultimate Total Load lb	Ultimate Unit Stress psi	Type of Failure & Location

Guided-Bend Tests (QW-160)

Type and Figure No.	Result

Toughness Tests (QW-170)

Specimen No.	Notch Location	Specimen Size	Test Temp.	Impact Values			Drop Weight Break(Y/N)
Specimen No.	Notch Location	Specimen Size	Test Temp.	ft. lb	% Shear	Mils	Drop Weight Break(Y/N)

Fillet-Weld Test (QW-180)

Result – Satisfactory: Yes No Penetration into Parent Metal: Yes No

Macro – Results

Other Tests

Type of Test

Deposit Analysis

Other

Welder’s Name Clock No. Stamp No.

Test conducted by: Laboratory Test No.

We certify that the statements in this record are correct and that the test welds were prepared, welded, and tested in accordance with the requirements of Section IX of the ASME Code.

Manufacturer

Date

(Detail of record of tests are illustrative only and may be modified to conform to the type and number of tests required by the Code.)

FN 5.005.3 (Rev. 1)